PS1 to NEOGEO (or JAMMA) Controller Open Source
Introduction
This projet allow you to use playstation 1 controller (gamepad or joystick) on Neogeo AES or MVS This projet is under GNU GENERAL PUBLIC LICENSE
You can build it by yourself for less than 15$ for MVS consolized
You can show the beta test and final result on our channel youtube :
Step 1 : Buy the components
-
1X Arduino nano with header pin :
https://www.aliexpress.com/item/33031395784.html -
1X Playsation 1 female connector controller
https://www.aliexpress.com/item/32819337715.html -
1X PCB
https://www.pcbway.com/project/shareproject/PS1_to_NEOGEO__or_Jamma__Controller.html -
FOR MVS CONSOLIZED with DB15 MALE not on mainboard ONLY :
1X DR15 DB15 D-SUB Angle Angled 15 Pin Female Male PCB Mount Socket Connector
https://www.aliexpress.com/item/32827674627.html -
FOR other AES & MVS with controller connector on mainboard (DB15 male with long cover, genuine part of SNK) ONLY:
15Pin Controller Cable for SNK NEOGEO AES/CD Controller, Length 1.8M
https://www.aliexpress.com/item/32934959428.html
Step 2 : Assembly it
It's just very simply solder, easy to make it
Step 3 : Program your Arduino Nano
Download Arduino IDE :
https://www.arduino.cc/en/main/software
Download the sketch on our GitHub :
https://github.com/Delta-island/PS1-to-Neogeo-Adaptor
And upload it on your Arduino nano !