Delta Island

gl6171 a écrit : mar. 26 mai 2026 10:00 Hi,
First off - thanks for the tutorial @Xrider , i recently purchased a Dreamcast from ebay and received a VA0 model and thought I would be stuck.

I was hoping you might have a higher res image of the 502 pads? I've removed both the 501 and 502 memory chips but i think i have lifted a pad on pin 31.

Not sure if this pin is connected to the footprint or the via on the other side of the footprint?

Xrider a écrit : mar. 26 mai 2026 17:57
Hello @gl6171

First of all, thank you for your kind words and compliments, I’m glad the tutorial helped you with your VA0 Dreamcast modification.
Yes, this point is connected on both sides, as shown in the photo below.